Materials
Casing made of glued laminated wood GL24 Class III ACERBOIS GLULAM certified and made from sawn timber from sustainably managed forests and designed according to the HTE process. Finished with 3 coats of wood stain.
PMMA Satin Body.
Thermo-injected plastic cover and flap.
Hot dipped galvanized steel base, finished in powder coated polyester.
Protection degree IP54-IK10.
Measurements
h x Ø : 1 200 x 300 mm
Weight : 40 kg
Characteristics
– Intelligent management system of charging, by controller and electronic card.
– Power modulation.
– Management of day/night rate.
– Flood lighting by pulsating LEDs.
– Lighting for access and charging by LEDs.
– Protection system integrated in the charging point.
– Energy access through RFID badge (20-badge set supplied).
Optional
– Meetering by dispatch of information via modem.
– Communication via Bus TCPIP and OCPP protocol (Open Charge Point Protocol).
– Compatible with Kiwhi Pass.
Fixation
Anchor rods : threaded rod M12 x 445.
Spacing dimensions on plate : Ø 250 mm.
Fixation holes : Ø 13 mm.
Anchor kit
– Sleeve location
Power supply Ø 63 mm.
– Sleeve location
Communication Ø 40 mm.
Standard colour identity
WOOD : Tonnelier
METAL : Brun 650 sanded
More: http://www.aubrilam.com/products/electric-vehicle-charging/station-bamboo.html
